Unika worktop jig instructions

shallow scribe worktop jig
unika worktop jig 700
solid laminate worktop jigunika compact laminate jig
unika worktop jig pegs

This jig has been designed to give a 10mm or a 23mm inset when joining worktops. The. 10mm inset gives a better finish when using small radius edged worktops (< This jig can be used to fit 90° corners for worktop widths 300, 400, 500, 600, 616 and. 620mm. A 30mm guide bush and a ½” (12.7mm) straight router cutter The jig can be used to fit 90° and 45° corners for worktops of widths 500, 600, bush and a ½” (12.7mm) tungsten tipped cutter (Unika Color Products, Set the jig on the worktop as shown. Clamp firmly with G-clamps. Position the router in extreme bottom left-hand point of the centre slot. Set the cutting The jig can be used to fit 90° corners for worktops of widths 600mm and 616 mm. A 30 mm guide bush and a ½” (12.7mm) tungsten tipped cutter are required for Unika Color Products Ltd. Unika House BELFAST SINK RECESS WORKTOP JIG Read the router's instruction manual if there are any doubts on the.Set the jig on the worktop as shown. Clamp firmly with G-clamps. Position the router in extreme left-hand point of the centre slot and proceed as described