R panel installation instructions

The versatile 7.2 panel, R-36 and 7/8" Corrugated panels can be specified for a wide range of building envelope applications including roofs, walls and linear panels. The M-36, M-42 and 1/2" Corrugated panels are suitable for wall and equipment screen projects. Trim All flashing and trim shall be fabricated by manufacturer or qualified fabricator. ***solar kit installation instructions *** 1 rjh 02/8/18 n.t.s. 2 3 4 measure the distance from the eave to the first row and use a string line over the top of the roof panel seams to establish a straight guideline for installation. use a rag to wipe away any excess dirt and oil from the surface of the roof panel. 8. Review this installation manual before installing finish floors. 9. Best practice for optimum performance is to insulate with an R-19 or R-30 between existing floor joists, below the Warmboard-R panel. 10. Call Warmboard at 877-338-5493 if you have any questions. 2 10 Important Installation Highlights Install the panels, tape the seams with ZIP System flashing tape, and the building is rough dried-in. When used on a wall, ZIP System sheathing functions as a combination wallsheathing, code-recognizedwater -resistive and air barrier. The sheathing panel seams are sealed with ZIP System flashing tape, protecting the wall from water intrusion. R-Loc™ is designed to maximize the potential of your structures, specifically the steel frame. With an added purlin bearing leg, you can count on easier installation and a more pleasing appearance. Industry standard configuration allows maximum purlin spacing for cost-effective building. Recommended for 1/2 : 12 or greater roof slopes, and