How to read a manual battery charger

Determine voltage of battery by referring to car owner's manual and make sure that output voltage selector switch is set at the correct voltage. If the charger has an adjustable charge rate, charge the battery initially at the lowest rate. CHARGER LOCATION Locate charger as far away from battery as DC cables permit. When the battery checks out around 1 or 2 amperes, it is the indicator that your battery is virtually full capacity, so you need to quit billing. When your battery charger is linked, you need to read the meter. Allow say, if you have actually a battery charger readied to 10 amps, the needle in the meter will aim there. Here are some quick tips on how to do the above process: 1. Open the hood of your car to find your car battery. 2. Get the car battery out of your car by removing both the negative-positive connector leads from their diode. 3. To loosen the clamp lead's end, you can use a screwdriver tool to unloose—just enough to relax, though, nothing more. 4. This user manual contains important safety and operating instructions for your off-board battery charger, model numbers 616270 & 616347. This product is intended for use with Permobil's power wheelchairs. It is not intended for use by children without supervision, including cleaning and maintenance of the product. Running a test on your battery charger is an easy process. Plug in your charger to an electrical outlet. Turn on your voltmeter unit. Take a battery or battery pack that's compatible to your battery charger. Check the readout on the voltmeter and see where the pointer is indicating to. Determine voltage of battery by referring to vehicle owner's manual and make sure that output voltage selector switch is set at correct voltage. 1. Locate the charger as far away from the battery as DC cables permit. 2. Never place the charger directly above the battery being charged; gases from the battery will corrode and damage the charger. 3. Below is the simple step-by-step guide on how to connect your battery charger to your battery. Read your manual for specific instructions if it comes with one. Determine which are the positive and negative terminal by looking for the plus and negative symbol or determining their color. Negative is usually black while Positive is usually red. This manual contains safety and operating instructions for your charger. Before using your charger, read all instructions for the charger, the battery to be charged, and the product that uses the batteries. WARNINGS • To reduce the risk of injury, charge only 24V, 7-18AH lead acid rechargeable batteries with the charger. Turn on the battery to the lowest charging rate to test if the battery charger is properly and safely connected to the battery. Step 6: According to the condition and capacity of the battery, adjust the charge rate of the battery charger to either trickle charge it (2-amp setting) or fast-charge at 10-amp or higher setting. Please read this Owner's Manual before using your Battery Charger The Sears model 200.71206, Manual Battery Charger, offers a wide range of features to accommodate the needs for home or light commercial use. This manual will show you how to use your charger safely and effectively. Please read and follow these instructions and precautions carefully. Chargers merely charge batteries. There are automatic options on some battery chargers that enable them to stop charging when they reach a pre-set poin